Toyota 2006 4runner Owner's Manual page 265

3. "SCAN" switch
When the "SCAN" switch is pushed, all
the files in a current folder will be
scanned. Only the first 10 seconds of
each file are played sequentially until
all the files are scanned. When the
switch is pushed for at least 0.8 sec-
onds, the first 10 seconds of each ini-
tial file of all the folders in the disk will
be played sequentially until the entire
initial files are scanned. To stop scan-
ning, push the switch again.
4. "FLD " switch
When the switch is pushed, the initial
file of the next folder will be played.
5. " FLD" switch
When the switch is pushed, the initial
file of the previous folder
played.
6. "DETAIL" switch
When the switch is pushed while a
track is played, the detailed file infor-
mation of the track will be displayed.
—Screen adjustment
You can adjust the color, contrast, tone
and brightness of the screen.
Push the "DISPLAY" button on the control-
ler and the "Display" screen will appear.
The screen may turn purple to deflect the
sunlight. This is not a malfunction.
will be
'06 4Runner_U (L/O 0508)
Operate the joystick up and down to se-
lect Brightness, Contrast, Tone, or Color
and left and right to make adjustments.
Color
Contrast
Tone
Brightness
+ or
− or "RED"
"GREEN"
Strengthens Strengthens
the green the red
color color
Strengthens Weakens
the contrast the contrast
Strengthens Weakens
the tone the tone
Brightens Darkens
265