Toyota 2006 4runner Owner's Manual page 385

7. Raise the vehicle high enough
so that the spare tire can be
installed.
Remember you will need more ground
clearance when putting on the spare
tire than when removing the flat tire.
To raise the vehicle, insert the jack
handle end into the jack (it is a loose
fit) and turn it clockwise with the han-
dle.
'06 4Runner_U (L/O 0508)
CAUTION
Never get under the vehicle when
the vehicle is supported by the
jack alone.
—Changing wheels
8. Remove the wheel nuts and
change tires.
Lift the flat tire straight off and put it
aside.
Roll the spare wheel into position and
align the holes in the wheel with the
bolts. Then lift up the wheel and get
at least the top bolt started through
its hole. Wiggle the tire and press it
back over the other bolts.
385