Toyota 2006 4runner Owner's Manual page 28

If the battery is disconnected or run
down, the power window may not operate
automatically and the jam protection func-
tion will not function correctly after you
reconnect, replace or recharge the battery.
In any of these cases, you should normal-
ize the power window.
To normalize the power window:
1. Push down the power window switch
and lower the window halfway.
2. Pull up the switch until the window
closes and hold the switch for a sec-
ond.
Make sure that the window opens and
closes automatically. If the power window
cannot be operated properly,
checked by your Toyota dealer.
CAUTION
D
Never try jamming any part of your
body to activate the jam protection
function intentionally, as it could re-
sult in a serious injury.
D
The jam protection function may
not work if something gets caught
just before the window is
closed.
28
have it
fully
'06 4Runner_U (L/O 0508)
Window
lock
switch