wsm RC72-27B Workshop Manual page 6

RCK54-75B· RCK54/60-24B· RCK60/RC72-27B W8M, 17031
SAFETY INSTRUCTIONS
1
S_A_F_ET_y_D_E_C_A_L_S
1
• The following safety decals are installed on the mower.
If a decal becomes damaged, illegible or is not on the mower, replace it. The decal part number is listed
in the parts list.
[RCK54-758 . RCK54-248 . RCK60-248 . RCK60-278]
SIGNeD Part No. K5763-4715-1
ACAUTION
1. KEEP ALL SHIELDS IN PLACE.
2. STOP ENGINE AND WAIT UNTIL
BLADES STOP BEFORE LEAVING
OPERATOR POSITION.
3. KEEP HANDS, FEET AND CLOTHING
AWAY FROM ALL MOVING OR
ROTATING PARTS.
4. MAKE SURE AREA OF OPERATION
IS CLEAR OF ALL PERSONS AND
FOREIGN OBJECTS.
5. STOP MOWER BLADES WHEN CROSSING
GRAVEL DRIVES, WALKS OR ROADS.
SIGN® Part No. K5720-4120-2
Do not put hands under the LIFT ARMS.
SIGN@ Part No. K5112-7312-1
DO NOT PUT HANDS OR FEET
INTO MOWER WHEN ENGINE
IS RUNNING.
[RCK54-24B . RCK60-24B . RCK60-27B]
®
•
[RCK54-75B]
(A) Forward
[RCK54-75B]
SIGN@PartNo. K5112-7311-1
CARE OF DANGER, WARNING AND CAUTION LABELS
1. Keep danger, warning and caution labels clean and free from obstructing material.
2. Clean danger, warning and caution labels with soap and water, dry with a soft cloth.
3. Replace damaged or missing danger, warning and caution labels with new labels from your local KUBOTA
dealer.
4. If a component with danger, warning or caution label (s) affixed is replace with new part, make sure new
label (s) is (are) attached in the same locations (s) as the replaced component.
5. Mount new danger, warning and caution labels by applying on a clean dry surface and pressing any bubbles
to outside edge.
17031F00010
17031Z00020
4