wsm RC72-27B Workshop Manual page 28

RCK54-758· RCK54/60-24B· RCK60/RC72-278 WSM, 17031
GENERAL
17030F00320
Front Link
1. Hook the front link (3) with the clevis pin section to front end of
the groove (2), and then turn the stopper (4) as shown in the
figure.
(Reference)
• Make sure the length (L) of the front link (3) as below.
RCK54-75B 510.0 mm
RCK54-24B
20.08 in.
Front link length (L) RCK60-24B
505.0 mm
19.88 in.
RCK60-27B
500.0 mm
19.69 in.
3
17030F00330
(1) Stay
(2) Groove
(3) Front Link
(4) Stopper
17031G00190
17030F00340
17030F00350
17030F00370
Setting Mower (RC72-27B)
1. Attach the front link (1) to the deck with clevis pins, plain
washers and rings.
2. Set the mower deck to the minimum cutting height.
3. Put chocks (2) at the mower gauge wheels. (Shown in the figure
below.)
4. Drive over the mower forward .
• NOTE
• Run the tractor at low speed when riding over the mower.
• Put the mower's rear link at its upward position.
• Attach the belt cover securely.
(Reference)
• Make sure the length (L) of the front link (1) is 530 mm (20.9 in.).
(1) Front Link (2) Chock
17030G00270
G-15