Check Point Of Initial 50 Hours - wsm RC72-27B Workshop Manual

17031 F00060
GENERAL
17030F00120
(2) Check Point of Initial 50 Hours
17031F00050
RCK54-75B' RCK54/60-24B' RCK60/RC72-27B WSM, 17031
Greasing Belt Tension Pulley
1. Grease the grease nipple (1) of the belt tension pulley if the
amount of grease is insufficient.
(1) Grease Nipple
17031 G00050
Greasing Belt Tension Pivot
1. Grease the grease nipple (1) of the belt tension pivot if the
amount of grease is insufficient.
(1) Grease Nipple
17030G00100
Greasing Lift Arms
1. Grease the grease nipples (1) of the lift arms if the amount of
grease is insufficient.
(1) Grease Nipple
17030GOO 110
Changing Gear Box Oil
1. Dismount the mower from the tractor, and place the mower on
level ground.
2. Remove the oil filler plug (2).
3. Remove the drain plug (1), and drain the used oil completely.
4. After draining the used oil, reinstall the drain plug.
5. Fill with new oil up to the specified level.
• IMPORTANT
• Use the specified gear oil.
Refer to "LUBRICANTS". (See page G-2)
(1) Drain Plug
G-6
(2) Oil Filler Plug
17031G00060