General; Mower Identification; General Precaution - wsm RC72-27B Workshop Manual

RCK54-75B' RCK54/60-24B' RCK60/RC72-27B WSM, 17031
GENERAL
[1] MOWER IDENTIFICATION
GENERAL
When contacting your local KUBOTA distributor, always specify
mower serial number.
(1) Mower Serial Number
17030F00070
17030G0001O
[2] GENERAL PRECAUTION
[A]
11900F00940
[8]
CD
[C)
3
• During disassembly, carefully arrange removed parts in a clean
area to prevent confusion later. Screws, bolts and nuts should
be installed in their original position to prevent reassembly
errors.
• When special tools are required, use KUBOTA genuine special
tools. Special tools which are not frequently used should be
made according to the drawings provided.
• Use KUBOTA genuine parts or KUBOTA-recommended parts
and lubricants or their equivalents.
• Gaskets and o-rings must be replaced during reassembly.
• Apply grease to new o-rings or oil seals before assembling. See
the figure.
• When reassembling external snap rings or internal snap rings,
they must be positioned so that sharp edge faces against the
direction from which a force is applied. See the figure.
• Metric screws, bolts and nuts are not interchangeable with
nonmetric fasteners.
• Remove oil and dirt from parts before measuring.
(1) Grease (A) Oil Seal
(2) Force (B) External Snap Ring
(3) Sharp Edge (C) Internal Snap Ring
11900800790
G-1