wsm RC72-27B Workshop Manual page 27

GENERAL
RCK54-75B' RCK54/60-24B' RCK60/RC72-27B WSM, 17031
17031F00160
Hydraulic Stop Adjustment
Combination A: RCK54·248, RCK60·24B with B1700, B2100,
82400,B2410
Combination B: RCK60-278, RC72-27B with B2710, B2910
1. Raise the position control lever (2) to get the lower links at a
level.
2. Set the stop knob screw (1) so that the level will not be lowered
further.
Combination C: RCK54-248, RCK60-24B with B7300, B7400,
87500
1. Raise the position control lever (2) to get the lower links at level.
2. Shift the locker (3) backward so that the level will not be lowered
further.
• NOTE
• Combination of RCK54-758 with 87400, 87500 is not
required for this adjustment.
(1) Stop Knob Screw (3) Locker
(2) Position Control Lever
[Combination A]
ill
[Combination 8]
1 2
17030F00300
17030F00310
17031G00170
Setting Mower (RCK54·758, RCK54-24B, RCK60-24B,
RCK60-278)
1. Turn the steering wheel fully left.
2. Install the mower from right side of the tractor.
3. Roll the mower under the tractor, and then return the steering
wheel.
17031G00180
G-14