Network Factory Default - Sanyo plc-xu4001 Owner's Manual

Network factory default

Network factory default
1. Select "Network factory default" in the Network menu and press SELECT button.
2. A confirmation box appears and select "Yes" and then press SELECT button.
3. Another confirmation box appears and select "Yes" and then press SELECT button.
4. All the wired LAN settings will go back to the factory default settings. For details, refer to
"Wired LAN factory default settings" (p.16).
"Crestron control" (pp.24-25) settings also will go back to the factory default settings.
*
15