Screen Setting - Sanyo plc-xu4001 Owner's Manual

This projector has the picture screen resize function, which enables you to customize the image size.
1 Press the MENU button to display the
to select Screen and then press the Point
button or the SELECT button.
2
item and then press the SELECT button.
Normal
Provide the image to fit the screen size.
Full
Provide the full screen image.
Provide the image at the 16:9 wide screen ratio.
Scale the image proportionally to fit the entire screen.
Either side of image may go over the screen.
Provide the image in its original size. When the
original image size is larger or smaller than the
screen size (for PLC-WU3001:1280 x 800; for
PLC-XU4001: 1024 x 768) the projector enters to
the panning mode automatically. Use the Point
buttons to pan the image. When adjusted,
the arrows will turn blue. When reached to the
correction limits, the arrows will disappear.
Custom
Provide the last stored aspect screen image.
Custom adj.
Adjust the screen scale and position manually with
this function. Press the Point
adj. and the Custom adjustment menu is displayed
to choose the item you want to adjust.
...... Adjust the Horizontal/Vertical
screen scale.
H&V ............... When set to On, the aspect
ratio is fixed. The Scale V
appears dimmed and becomes
unavailable. Adjust Scale H, then
the screen scale is automatically
modified based on the aspect
ratio.
.. Adjust the Horizontal/Vertical
screen position.
Common ....... Save the adjusted scale or
position to all the inputs. Press
the SELECT button at Common
to display a confirmation box. To
save the scale or position, press
the SELECT button at
Custom is selected, the saved
scale or position is used.
............. Reset the all adjusted values.
Press the SELECT button at
box. To reset, press the SELECT
button at
34

Screen Setting

button at Custom
. When
to display a confirmation
.
Screen Menu
higher than 1920 x 1200. If your computer's
screen resolution is higher than it, reset the
resolution to the lower before connecting to the
projector.
1280 x 800; for PLC-XU4001: 1024 x 768) is
modified to fit the screen size in initial mode.
and
cannot be displayed when 480i, 575i, 480p,
720p, 1035i or 1080i is selected in the PC
System Menu (p. 28).
is selected in the Screen menu,
can not be selected.
Custom adj.
automatically .
is limited depending on the input
signal.
are disabled and
Normal is set
and