Setting 3 - Sanyo plc-xu4001 Owner's Manual

Setting 3

Item Description
Key lock..................Sets the prohibition of controls either
Projector or Remote control. (OFF,
Projector, Remote control)
Fan control Sets the fan control speed.
.............
OFF
ON1
ON2
Filter counter(h)
......................................Displays the filter counter. Reset the time
after filter clean-up. Click "Reset", a con-
firmation display appears, and then click
"OK", the time will be reset.
Filter warning.....Sets the time to indicate the filter warn-
ing message on the screen. (OFF, 1000H,
2000H, 3000H, 4000H, 5000H, 6000H)
Total power savings
......................................Displays the total accumulated power
savings of the projector and the total amount of CO2 exhausted from the projector.
Click "Reset", a confirmation display appears, and then click "OK", the figures will be
reset.
Factory default...Sets all of the projector control items to the factory default setting except the fol-
lowing items.
User Logo, Logo PIN code lock, PIN code lock, Lamp Corres. Value, Filter counter, PJ
time
* This function is effective for all the Network settings.
No show.................Sets the black out image temporarily. (ON, OFF)
Freeze......................Sets the image to freeze mode. (ON, OFF)
Closed caption..Sets the closed caption function.
Closed caption...Sets the closed caption mode. (OFF, CC1, CC2, CC3, CC4)
Color .....................Sets the color of the contents. (Color, White)
Normal mode
Highland mode 1
Highland mode 2
Setting up the projector
43