Sanyo plc-xu4001 Owner's Manual page 23

Rotate the Zoom Ring to zoom in and out.
Rotate the Focus Ring to adjust the focus of
the image.
Auto setup function is provided to automatically execute the setting of Auto setup (includes Input
search, Auto PC adj. and Auto Keystone functions) in the setting menu by just pressing he AUTO
SETUP button on the top control or the AUTO SET button on the remote control. Refer to page 45 for
the setting of the Auto setup function.
does not correct horizontal distortion.
is set to On in the Setting menu (pp.35, 43).
be ensured with the Auto setup function. If
the distortion cannot be corrected properly by
pressing the AUTO SETUP or AUTO SET button,
adjust manually by pressing the KEYSTONE
button on the remote control or selecting Keystone
in the Screen menu (pp.35, 43).
,
some computers cannot be fully adjusted with the
Auto PC Adjustment function. When the image is
not provided properly with this operation, manual
adjustments are required (pp.30-31).
If a projected picture still has keystone distortion
after pressing the AUTO SETUP button on the
top control or the AUTO SET button on the
remote control, correct the image manually as
follows:
Press the KEYSTONE button on the remote
control. The Keystone dialog box appears.
Use the Point buttons to correct keystone
distortion. The keystone adjustment can be
stored (pp.35, 43).
Reduce the upper
width with the Point
button.
, and Vertical of
Reduce the lower
width with the Point
button.
Basic Operation
Focus Ring
correction.
correction.
correction.
the remote control once more while the
keystone dialog box is being displayed, the
keystone adjustment will be canceled.
on the input signal.
Zoom Ring
23