Snmp Setting - Sanyo plc-xu4001 Owner's Manual

Chapter 3 Basic Setting and Operation
"Community". There are two access modes in a community, Refer (read only) and Set (read-
write). This projector allows to use Refer (read only) only. The SNMP message informs the pro-
jector status called "Trap" to an administrator. Click SNMP Setting on the main menu and
set up each item.
PJ information
Item
Contact ...............................................Enter user name of the projector etc (optional). (up to 114 characters)
Place .....................................................Enter place of the projector (optional). (up to 116 characters)
Community name(refer).......Enter community name (read only). Default name is "public". (up to 115
Trap
Item
Community name......................Enter community name to send "Trap". Default name is "public". (up to
Trap address...................................Enter IP address of the SNMP manager computer to receive "Trap".
30

SNMP setting

This projector provides a SNMP (Simple Network Management Protocol)
agent function. The SNMP consists of a manager and agents. The group
which communicates information each other with SNMP is called
Description
characters)
Description
64 characters)