Sanyo plc-xu4001 Owner's Manual page 26

Basic Operation
Press the NO SHOW button on the remote
control to black out the image. To restore to
normal, press the NO SHOW button again or
press any button. When the projected image
is captured and is set as User in the Logo
selection (p. 46), the screen changes each time
you press the NO SHOW button as follows.
......
When use the MUTE button to release the
No show function, the mute function can not
be operated at the same time.
Press the P-TIMER button on the remote
control to operate the Count up/Count down
function. Refer to p.52 for detail of Setting for
the P-timer function.
To stop the count time, press the P-TIMER
button.
To cancel the P-timer function, press and hold
the P-TIMER button.
Press the IMAGE button on the remote control
to select a desired image mode of the screen.
See pages 32, 40 for details.
Select the screen size (See pages 34-35,
42-43 for details).
Turn on or turn off the Picture in Picture function.
26
See the previous page for the description of other
buttons.
disappears after 4 seconds.