Front
⑨
①
Back
⑦
⑧
⑥
Bottom
⑭
8
Part Names and Functions
②
③
④
⑤
⑨
⑩
⑪
⑨
⑫
⑬
⑮
①
②
③
④ Projection Lens
Do not cover the light beam in front of the lens.
High temperature from light beam may damage
the lens.
⑤ Lens Cap
(See page 62 for attaching.)
Do not turn on a projector with lens cap
attached. High temperature from light beam
may damage lens cap and result in fire hazard.
⑥ Speaker
⑦
Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.
⑧ Lamp Cover
⑨
⑩
⑪
⑫
⑬ Power Cord Connector
⑭ Filter Covers
⑮
⑫ LAN Connection Terminal is for the Network
function. Refer to the owner's manual of
"Network Set-up and Operation".
This slot is for a Kensington lock used to
deter theft of the projector.
*Kensington is a registered trademark of ACCO
Brands Corporation.