Sanyo plc-xu4001 Owner's Manual page 39

Direct Operation
Select the desired image mode among
, Standard,
,
, and
IMAGE button on the remote control.
Menu Operation
1
Press the MENU button to display the
buttons to select
press the Point
button.
2
desired item and then press the SELECT
button.
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Picture mode with improved halftone for
graphics.
Cinema
Picture mode adjusted with fine tone.
For the image projected on a blackboard.
This mode helps enhance the image projected
on a blackboard. This is mainly effective on a
green colored board, not truly effective on a
black colored board.
At the time of simple projection on the colored
wall, you can get the close color image to the
color image projected on a white screen by
selecting the similar color to the wall color from
the preset four colors.
For viewing with the user preset image mode in
the Image Adjust Menu (p. 41).
, Cinema,
, ,
by pressing the
and then
button or the SELECT
Standard
Cinema
39