Network Factory Default; Wired Lan Factory Default Settings - Sanyo PLC-ZM5000L - 5000 Lumens Owner's Manual

Network set-up and operation

Hide thumbs Also See for PLC-ZM5000L - 5000 Lumens:

Table of Contents

Network factory default

1. Select "Network factory default" in the Network menu and press SELECT button.

2. A confirmation box appears and select "Yes" and then press SELECT button.

3. Another confirmation box appears and select "Yes" and then press SELECT button.

4. All the wired LAN settings will go back to the factory default settings. For details, refer to

"Wired LAN factory default settings" as shown in the table below.

Parameter

DHCP

IP ADDRESS

SUBNET MASK

GATEWAY ADDRESS

DNS ADDRESS

Settings

Off

169.254.100.100

255.255.0.0

255.255.255.255

Network factory default

Table of Contents