Test Print - Oki B431L6 Maintenance Manual

Oki Data CONFIDENTIAL

4.1.3.5 Test print

This self-diagnostic menu is used to print the test pattern that is built inside PU. Other test patterns are stored in the
controller.
This test print cannot be used to check the print quality.
Diagnosis for the abnormal print image should be performed in accordance with section 6.
1. Enter the self-diagnostic mode (level 1), press the [MENU
key when the "TEST PRINT" is displayed in the upper row of the display area. (Pressing the [MENU
increments the test item and pressing the [MENU
2. The setting items that can be applied to the test print only is displayed in the lower row of display area. Keep
pressing the [MENU
increments the test item and pressing the [MENU
entry [Default setting], go to step 5.)
3. Keep pressing the [MENU
setting item is displayed in the upper row of display area, and the setting value is displayed in the lower row of
display area.
Pressing the [MENU
value. (The setting value that is displayed at last is applied.) Pressing the [ ] key determines the entry value,
and returns to step 2. Repeat step 3 as required.
TEST PATTERN
1
Display
PRINT EXECUTE
TEST PATTERN
TEST CASSETTE
PAGE
DUPLEX
• is the initial default value. The menu item that is set here is valid in this menu item only.
(The setting item is not saved in EEPROM.)
Note! PAGE setting
Pressing the [MENU ] key or the [MENU ] key shifts the digit. Pressing the [ONLINE] key increments
the setting value. Pressing the [CANCEL] key decrements the setting value. If print is executed while the
number of print copies remains in "0000", printing will continue infinitely.
44983601TH Rev.1
] ]
, [MENU key until the desired menu item is displayed. (Pressing the [MENU
] ]
, [MENU key, and press the [OK] key at the menu item set by step 2. Then, the
]
key increments the setting value. Pressing the [MENU
Setting value Function
– Pressing the [OK] key starts print/Pressing the [CANCEL] key
terminates print. (In units of page)
0 0: White paper print
1~7: Refer to next page. (Pattern print)
8~15: White paper print
TRAY1 Selecting source of paper supply.
TRAY2
If the TRAY 2 is not installed, TRAY2 is not displayed.
MPT
0000 Setting number of the test print copies
OFF Selecting OFF for duplex (2-sided) print.
Duplex (1-sided) print is performed by the stack of one sheet of paper.
1 PAGES STACK
] or ]
[MENU key repeatedly ,and press the [OK]
]
key decrements the test item.)
]
key decrements the test item.) (If all setting items need no
4. ADJUSTMENT
]
key
]
key
]
key decrements the setting
4-19 /