Eject Motor (3.3.19) - Oki B431L6 Maintenance Manual

Oki Data CONFIDENTIAL
3.3.19 Eject Motor
(1) Remove the Cover-Side-R and Cover–Side-L. (Refer to 3.3.4 / 3.3.5)
(2) Remove the CU-Board. (Refer to 3.3.6)
(3) Remove the Cover Assy Stacker. (Refer to 3.3.13)
(4) Remove the Fuser Assy. (Refer to 3.3.15)
(5) Remove the Cover Assy Rear. (Refer to 3.3.17)
(6) Remove the Guide-Eject-Lower-Assy. (Refer to 3.3.18)
(7) Remove the two screws (Silver)
(8) Remove the two screws (Silver)
(9) Installing is performed by the inverse procedure with removing.
(Note on removing / installing)
1. Beware of not to touch the DC motor inattentively (Do not rotate motor).
44983601TH Rev.1
. Remove the
. Remove the
⑤
Plate-Gear-Exit and Gear
Eject-Motor .
④
3. Parts replacement
.
FFC cable
①
①
②
③
3-26 /