Adjustment - Oki B431L6 Maintenance Manual

Oki Data CONFIDENTIAL
This chapter provides explains relating to the adjustment that is necessary while replacing part. Adjustment
is performed by modifying the value of parameter that is set on the EEPROM of main PCB board. Parameter
can be set by key operation that is from the operator panel. There are 3 kinds of maintenance mode (menu)
on this printer. While replacing part it is need to choose one of the mode.
4.1 Category and function of maintenance mode
• Maintenance mode can be divided into User maintenance mode that is released to user, Engine
Maintenance Mode and System Maintenance Mode that are not released to user but for the only
use of maintenance personnel.
• To view each category, push the button of "MENU
last category, the display returns to the first category..
• If want the displayed function to be effective, push the "OK" button.
• For terminating the mode that is in category displaying, push the key of "ON LINE" and return to
operation mode.
4.1.1 User maintenance mode (Administrator Menu)
To open Administrator Menu, switch the power on while holding down the "OK" button.
After the category has been displayed, let go of the button "OK".
Administrator Menu has the following function.
Note!
Category
Setting item
(Upper case)
OP MENU
ALL
CATEGORY
INFORMATION
MENU
SHUTDOWN
MENU
PRINT MENU
MEDIA MENU
SYS CONFIG
MENU
PCL
EMULATION
PPR
EMULATION
44983601TH Rev.1

4. ADJUSTMENT

• This mode is only B431.
• Refer to "Configuration Tool" for B401/B411.
• (*1) cannot be set by "Configuration Tool".
Operation panel display
Setting item
(Lower case)
ENABLE
DISABLE
ENABLE
DISABLE
ENABLE
DISABLE
ENABLE
DISABLE
ENABLE
DISABLE
ENABLE
DISABLE
ENABLE
DISABLE
ENABLE
DISABLE
" and "MENU
Default
value * Only English is supported for panel display
*
Sets category ALL Enable/Disable of user menu. If set to
invalidation, user menu won't to be display. The following
setting item is not displayed if it is invalid. The PANEL LOCK
will be attained by setting DISABLE of this MENU.
*
Setting validation / Invalidation of INFORMATION MENU
category. If invalidate it the INFORMATION MENU category
of user menu is not displayed.
*
Set Category SHUTDOWN MENU Enable/Disable.
Set to Disable, Category SHUTDOWN MENU of user menu
is not displayed.
*
Set Category PRINT MENU Enable/Disable.
Set to Disable, Category PRINT MENU of user menu is not
displayed.
*
Set Category MEDIA MENU Enable/Disable.
Set to Disable, Category MEDIA MENU of user menu is not
displayed.
*
Set Category SYSTEM CONFIG MENU Enable/Disable.
Set to Disable, Category SYSTEM CONFIG MENU of user
menu is not displayed.
*
Set Category PCL EMULATION MENU Enable/Disable.
Set to Disable, Category PCL EMULATION MENU of user
menu is not displayed.
*
Set Category PPR EMULATION MENU Enable/Disable.
Set to Disable, Category PPR EMULATION MENU of user
menu is not displayed. Except Japan Oriented.
[Display Condition]
"SYSTEM MAINTENANCE"-"PERSONALITY"-"IBM PPR III
XL" is Enable.
4. ADJUSTMENT
". After the screen displays the
Function
4-1 /