P.t.o. Operation; P.t.o. Gear Shift Lever; P.t.o. Shaft Cover And Shaft Cap - Kioti CK20 Owner's Manual

P.T.O OPERATION
P.T.O GEAR SHIFT LEVER
(1) P.T.O Gear Shift Lever
OFF ON
CAUTION
To avoid personal injury:
Disengage P.T.O, stop engine,
and allow all rotating compo-
nents to come to a complete stop
before connecting, disconnecting,
adjusting, or cleaning any P.T.O
driven equipment.
1. The tractor has a 540 rpm speed position.
2. P.T.O shifting needs clutch operation.
Press the clutch pedal down completely
to stop the tractor movement and any P.
T.O driven equipment movement before
shifting the P.T.O gear shift lever.
IMPORTANT
To avoid shock loads to the P.T.O,
reduce engine speed when engag-
ing the P.T.O, then open the throttle
to the recommended speed:
196O731A
To avoid damage of transmission,
before shifting the P.T.O gear
shift lever, fully disengage the
main clutch.
Engine Speed
Model
min-1 (rpm)
CK20
2,646
CK20H
NOTE
There is a P.T.O-1 (540 rpm) indicated
mark on the tachometer board.
Tractor engine will not start if P.T.O
gear shift lever is in the engaged "ON"
position.
P.T.O SHAFT COVER AND SHAFT
CAP
(1) P.T.O Shaft Cover (2) P.T.O Shaft Cap
You should keep the P.T.O cover in place
P.T.O Speed at all times and remember to replace the
Shaft
min-1 (rpm)
cap when the P.T.O shaft is not in use.
6-Spline 540
OPERATING THE TRACTOR 7-23
196O734A