Table of Contents
Advertisement
The minimum clearance spaces
around the Baxi Bermuda SL3 are:
Top:
76mm (3 in)
Side:
63mm (2
76mm
1
/
in)
2
63mm
63mm
page 6
CLEARANCES AROUND
THE FIRE
These clearances must not be
reduced or obstructed in any way.
All clearances are essential in order
to allow correct servicing of the
appliance and access to the fire
control knob.
76mm
229mm
A shelf may be fitted not less than
76mm (3 in) above the fire and not
more than 229mm (9 in) in depth.
SPARE PARTS
Any repairs to the appliance during
the guarantee period, will usually be
the responsibility of the installer after
which, spare parts may be obtained
through an approved Baxi stockists.
The spare parts available and their
relevant G.C. numbers can be found
at the back of the installation and
servicing instructions booklet.
The appliance name and G.C.
number, which are on the data
badge, should always be quoted. The
data badge is visible on the left hand
fire support leg when the controls
cover panel is removed.
Advertisement
Table of Contents
