Table of Contents
Advertisement
Installation Menu
The Installation menu is used for changing the installation settings.
Setting items
V Keystone
Image Flip
Lens Control
Illumination
36
Installation Menu
Description
Corrects the vertical trapezoidal distortion of the picture.
When the bottom of the trapezoid is longer than the top (
a lower value (– direction).
When the top of the trapezoid is longer than the bottom (
a higher value (+ direction).
Note
Depending on the picture position adjusted with the CORNER
CORRECTION feature, the aspect ratio of the picture may change from
the original or picture distortion may occur with V Keystone adjustment.
Flips the picture on the screen horizontally and/or vertically.
HV: Flips the picture horizontally and vertically.
H: Flips the picture horizontally.
V: Flips the picture vertically.
Off: The picture does not flip.
Use this item for installation for the backside projection or ceiling
installation.
Avoids any operation of the lens such as "Lens Zoom," "Lens Focus,"
and "Lens Corner Correction," by mistake.
On: Enables adjustment of the lens.
Off: Prevents any adjustment of the lens.
Changes the brightness of the LED indicator.
High: The LED indicator lights brightly.
Low: The LED indicator lights not so brightly.
Off: The LED indicator does not light normally.
): Sets
): Sets
Advertisement
Table of Contents
