Table of Contents
Advertisement
Setting items
3D Brightness
3D Depth Adjust
Simulated 3D
Effect
Dynamic Range
Test Pattern
Description
For adjusting the brightness of the picture when watching 3D video
images.
You can select the brightness from "High" or "Standard."
For adjusting the depth of the 3D video images on the projection surface.
The setting can be made only when a 3D Format other than "Simulated
3D" is selected.
Depth
Front
We recommend that "3D Depth Adjust" be set to "0." The 3D video
images may be difficult to perceive, depending on the setting of "3D
Depth Adjust."
For adjusting the 3D effect when 2D content is converted to 3D video
images. You can select the effect from among "High," "Middle," and
"Low."
Tip
There are differences in perception of 3D video images converted by the
simulated 3D function among individuals.
Sets the video input level for HDMI 1, 2, 3, and 4 connectors.
Auto: Sets the video input level automatically.
Limited: The video input level is set for signals of 16-235.
Full: The video input level is set for signals of 0-255.
Note
If the video output setting of the connected HDMI device is not set
correctly, light and dark parts of the video may appear too light or too
dark.
Displays a test pattern according to the setting.
On: A test pattern appears on the screen to be used when adjusting the
lens with "Lens Focus," "Lens Zoom," and "Lens Corner Correction."
Off: A test pattern does not appear.
Tip
While the test pattern is displayed, it is only displayed in green to allow
you to adjust the focus easily.
Normal
Depth
Function Menu
35
Advertisement
Table of Contents
