Table of Contents
Advertisement
To adjust the feet
You can adjust the height by using the six
feet at the bottom of the unit.
Foot
height
1
Loosen the fixing nut by turning it
the left when viewed from the top
2
Turn the adjusting nut to adjust the
length of the foot.
Extending: Turn the adjusting nut to the
right (clockwise) when viewed from the
top.
Contracting: Turn the adjusting nut to
the left (counterclockwise) when
viewed from the top.
3
Tighten the fixing nut by turning it to
the right when viewed from the top
Tips
• Use the supplied adjustment tool for
adjusting the feet.
• The height does not change if you turn the
foot.
Notes
• Be careful not to catch your finger when
turning the fixing nut or adjusting nut.
• You can adjust the foot height up to 60 mm.
If the foot height is more than 70 mm, the
foot may come off and the unit may drop
causing an injury.
Fixing nut
Adjusting nut
Foot
to
.
.
Tips
• Note that more detailed adjustment is
possible for the Edge Blending function
when using multiple units in a line with a PC
application.
For more details, consult with qualified Sony
personnel.
• When multiple projectors are set up in a line,
the temperature inside the projectors may
increase due to exhaust vent proximity, and
an error indication may result.
In this case, space the projectors farther apart
and/or install deflection partitioning between
them.
For more details, consult with qualified Sony
personnel.
Adjusting the Projection Image
13
Advertisement
Table of Contents
