Table of Contents
Advertisement
Setting items
Aspect
[ASPECT]
Description
You can set the aspect ratio of the picture to be displayed for the current
input signal (page 19).
1.85:1 Zoom: A 1.85:1 aspect ratio picture is displayed in its original
aspect ratio, enlarged so that black bands do not appear at the top and
bottom of the projection surface.
2.35:1 Zoom: A 2.35:1 aspect ratio picture is displayed in its original
aspect ratio, enlarged so that black bands at the top and bottom of the
projection surface are as small as possible.
Normal: Input video is displayed in its original aspect ratio, enlarged to
fill the projection surface. This mode is suitable for viewing 1.78:1
(16:9) and 1.33:1 (4:3) video.
Stretch: Displays video that has been squeezed to 1.33:1 (4:3) as 1.78:1
(16:9) aspect ratio.
Tips
• Selectable aspect modes vary depending on the input signal (page 55).
• The aspect cannot be selected for an input signal from a computer or an
input signal with a resolution of 4096 × 2160, or when "V Keystone"
on the Installation
menu is set to other than 0 (pages 50, 51, 55).
31
Screen Menu
Advertisement
Table of Contents
