Ei Electronics Ei208DWRF Instructions Manual page 32

(6) If the Alarm is fitted with an RF Module, ensure that there are no problems with
the other RF interconnected Alarms and that all Alarms are housecoded correctly.
(7) Press the test/hush button to silence the Alarm.
If the CO Alarm continues to sound it is possibly defective and should be replaced
(see 'Getting the CO Alarm Serviced' section).
WHAT TO DO IF THE ALARM BEEPS:
The CO Alarm will beep and the amber light will flash to indicate a fault condition.
Fault Condition
Low Battery
Faulty Sensor
End of Life
Before replacing the battery, check the REPLACE UNIT BY label on side of unit. If the date has been
exceeded, replace the alarm not the battery.
31
CO Alarm Fault Chart
Fault Indication
1 beep with 1 amber flash
2 beeps with 2 amber flashes
3 beeps with 3 amber flashes
Action
Ei207 Models
Replace Battery
Replace Alarm
Replace Alarm
Ei208 Models
Replace Alarm
Replace Alarm
Replace Alarm