Filter Replacement; Filter Cleaning And Replacement Cycles; Setting Filter Reset; Forcible Reset Mode - Coway AP-1009CH User Manual

FIltEr rEPlacEmENt

- Always unplug the air purifier before cleaning the product.
- Do not use detergents that contain organic solvents (solvent, thinner, etc), bleach,
chlorine, or abrasives.
- Do not put the air purifier in water or spray water directly on it.
 filter cleaning and replacement cycles
Filter
UFY Pre-filter
Medium Deodorization filter
ANTI-FLU HEPA™ filter
 Each service life is based on 24 hour use in Speed step 1.
 The recommended filter replacement cycles may differ depending on the operating
environment.
 Setting filter reset
1. After replacing filter, turn on the power.
2. To begin reset mode, press and hold the reset button for approximately 1 second.
3. To set reset, press and hold the reset button for approximately 1 second again.
 If the auto button is pressed or 20 seconds have passed in reset mode,
the reset mode is cancelled.
 If you want check which filter to replace, please refer to page 11.
 forcible reset mode
When you have replaced a filter before the filter replacement cycle is reached.
1. Press and hold the reset button for 1 second(forcible reset).
2. Push the speed button to select the replaced filter.
When selecting the desired airflow LED, LED is blinked.
Step 1 LED : Medium deodorization filter, Step 2 LED : ANTI-FLU HEPA™ filter
Step 1 + 2 LED : Medium deodorization filter & ANTI-FLU HEPA™ filter
3. To set forcible reset, press and hold the reset button for approximately 1 second.
When the auto button is pressed or 20 seconds have passed in the forcible reset mode, the
forcible reset mode is cancelled.
cycles
Every 2 ~ 4 weeks
Every 2 ~ 4 weeks
Every 12 months
Every 36 months
method
Cleaning
Vacuum Cleaning
Replacement
Replacement