FIltEr rEPlacEmENt
- Always unplug the air purifier before cleaning the product.
- Do not use detergents that contain organic solvents (solvent, thinner, etc), bleach,
chlorine, or abrasives.
- Do not put the air purifier in water or spray water directly on it.
Filter cleaning and replacement cycles.
Filter
UFY Pre-filter
Medium Deodorization filter
ANTI-FLU HEPA™ filter
Each service life is based on 24-hour use in Speed step 1.
The recommended filter replacement cycles may differ depending on the operating
environment.
Setting filter reset
1. After replacing filter, turn on the power.
2. To begin reset mode, press and hold the reset button for approximately 1 second.
3. To set reset, press and hold the reset button for approximately 1 second again.
If the power/speed button is pressed or 20 seconds have passed in reset mode,
the reset mode is cancelled.
Forcible reset mode
When you have replaced a filter before the filter replacement cycle is reached.
1. Press and hold the reset button for 1 second(forcible reset).
2. Push the speed button to select the replaced filter.
When selecting the desired airflow LED, LED is blinked.
Step 1 LED : Medium deodorization filter , Step 2 LED : ANTI-FLU HEPA™ filter
Step 1 + 2 LED : Medium deodorization filter & ANTI-FLU HEPA™ filter
3. To set forcible reset, press and hold the reset button for approximately 1 second.
When the power button is pressed or 20 seconds have passed in the forcible reset mode, the
forcible reset mode is cancelled.
cycles
Every 2 ~ 4 weeks
Every 2 ~ 4 weeks
Every 12 months
Every 36 months
method
Cleaning
Vacuum Cleaning
Replacement
Replacement