Related Manuals for Coway AP-1008DH
Summary of Contents for Coway AP-1008DH
- Page 1 Coway Air Purifier AP-1008DH • This product is for domestic use only.It cannot be used in an overseas country where the power voltage is different. • Warranty card is included in this user’s manual. • Read and save these instructions...
- Page 2 FEATURES 1. MCC medium filter This is a versatile filter which removes the yellow dust that occurs during the spring season as well as toxic gases, viruses and bacteria such as influenza, legionella, etc. MCC medium filter MCC medium filter 2.
-
Page 3: Table Of Contents
DEAR CUSToMERS coway air purifier Thank you for using the Please read the user’s manual to use and maintain the product correctly. If you encounter a problem while using the product, you may easily solve the problem by referring to the user’s manual. -
Page 4: Safety Information
• Do not attaempt to repai or modify the power cord. • If the power cord is damaged, do not replace the cord yourself. Call coway service center to have it replaced. • Do not install the air purifier near a heating device. - Page 5 • Do not install the product in areas where moisture, dust or water (rainwater) is present. • Do not use the product in areas where flammable gases or combustible materials are used or stored. • Do not stick sharp objects such as a screw driver into the pollution sensor unit.
-
Page 6: Warning
SAFETY InFoRMATIon warning : If not observed, serious injury or property damage could occur. • Do not stick fingers or foreign objects into the air inlet or outlet. • Do not let children hang on to the product or climb on it. •... -
Page 7: Caution
Caution : If not observed, slight injury or property damage could occur. • Do not install the product on a sloped floor. • Do not exert excessive force or shock on the product. • When the product is in use, maintain a distance of at least 20 cm from walls or adjacent objects and 30 cm - 60 cm above the product. -
Page 8: Parts Name
PARTS nAME Front / Rear < AP-1008DH > Display part/ operation part Pollution level indicator/mood lamp Speed indicator Air outlet Pollution sensor unit Handle Filter replacement reset button Power cord Others User’s manual... -
Page 9: Air Purified Process
AIR PURIFIED PRoCESS ■ Pre-filter Treated with antibacterial materials, the pre-filter removes relatively large dust, mold, human hair, pet hair, and others. ■ MCC medium filter This is a versatile filter which removes the yellow dust that occurs during the spring season as well as toxic gases, viruses and bacteria such as influenza, legionella, etc. -
Page 10: How To Install Filter
PREPARATIonS Please Check before Use! The product is for 220 V – 240 V~ 50 Hz/60 Hz only. Make sure to connect the power plug to a grounded electric outlet (220 V – 240 V~ 50 Hz/60 Hz) dedicated to the product. how to install filter - Make sure to remove each filter’s plastic packing before installing filters. -
Page 11: Operation/Indication Part
oPERATIon / InDICATIon PART Indication Part Light sensor It is a sensor that detects light. Speed indicator By using the speed button, it is possible to select the airflow speed in 4 steps. (Step 1 → Step 2 → Step 3 → Turbo) ∗... - Page 12 oPERATIon / InDICATIon PART Operation Part Auto mode button and its Power button and its indicator indicator Use it to turn the product Use it to select the automatic on/off. When the power operation mode. When the auto is on, the indicator is turned on. mode is selected, the indicator is ∗...
- Page 13 It displays the current cleanliness (pollution) level of the room. Clean:Blue Lightly polluted: Polluted: Highly Light purple Dark purple polluted : Red ∗ The cleanliness (pollution) level of the room is determined by the color at the end of the penetrating hole.
-
Page 14: How To Use
how To USE - Before operating the product, connect the power plug to a dedicated electric outlet - Once the power is turned on, you will see the previously used operation mode, Tips already set for you to use. ■ To operate the manual mode Press the power button and then select the speed of the wind by pressing the speed button. - Page 15 ■ To operate the silent mode Press the power button and then the silent button. In silent mode, the airflow speed is ▶ lowered below step 1 (lower rpm), making the environment quiet and pleasant. ■ To operate the sleep mode(available only in auto mode operation) If the surroundings are dark for 3 minutes or longer in auto mode operation, the product automatically switches to sleep...
-
Page 16: Adjust Particle Sensor
ADJUST PARTICLE SEnSoR How to Adjust the Sensitivity of the Pollution Sensor When the product is shipped out, the pollution sensor is set to standard sensitivity. If the pollution level stays at the highest level after 2 hours of operation or stays at the lowest level for more than 1 hour when the air does not seem clean, users can adjust the sensitivity of the pollution sensor as follows. -
Page 17: Cleaning Method
CLEAnInG METhoD - Always unplug the air purifier before cleaning the product. - Do not use detergents that contain organic solvents (solvent, thinner, etc), bleach, chlorine, or abrasives. Tips - Do not put the air purifier in water or spray water directly on it. ■... - Page 18 CLEAnInG METhoD - Always unplug the product before cleaning the filter. - The pre-filter is reusable by removing dust or cleaning it with water. - If the pre-filter is not cleaned for a long time, the product performance may deteriorate. Tips - The HEPA filter are not reusable with cleaning.
-
Page 19: Filter
■ how to replace filters - Check that the ‘front’ sides of filters are in the correct direction. - To maintain optimal performance of the product, use original coway filters. - Always unplug the air purifier before replacing filters. ■ Filter cleaning and replacement cycles... -
Page 20: Troubleshooting
TRoUBLEShooTInG The air purifier may operate abnormally not because of the product malfunction but because of minor causes or the fact that the user is not familiar with the product use. In such a case, problems can be solved easily even without the help from the service center just by checking the following. -
Page 21: Specification
SPECIFICATIon Air Purifier Product specification Model AP-1008DH Rated voltage 220 V – 240 V~ 50 Hz/60 Hz Phase Power consumption 47 W Product insulation grade Grade 2 device Dust collection mode Mechanical dust collection method (HEPA filter) Safety feature Power is shut down when the front cover is opened. -
Page 22: Warranty Card
INCLUDING ITS REPRESENTATIVES, TO MAKE ANY only to Product used for an application specified REPRESENTATION OR TO OFFER ANY WARRANTY, by COWAY for the Product and applied in strict CONDITION OR GUARANTY IN RESPECT OF THE accordance with COWAY published specifications PRODUCT OTHER THAN THIS WARRANTY. - Page 23 COWAY no later than accident, alteration, improper installation or thirty (30) days after a defect is discovered or other acts that are not the fault of Coway or should by reasonable diligence have been the manufacturer of the product or that are discovered.
- Page 24 MADE IN KOREA 1210242 www.coway.com...