Zanussi ZCG92386 User Manual page 20

Problem
The appliance makes noises.
The flame colour is orange or yel-
low.
The oven does not heat up.
The lamp does not operate.
Steam and condensation settle
on the food and in the cavity of
the oven.
The oven does not heat up.
The oven does not heat up.
The turnspit does not rotate.
It takes too long to cook the
dishes or they cook too quickly.
The display shows an error code
that is not in this table.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
20
Possible cause
The oven is deactivated.
The lamp is defective.
You left the dish in the oven for
too long.
The clock is not set.
The necessary settings are not
set.
The turnspit is not correctly in-
stalled into the turnspit hole.
The temperature is too low or too
high.
There is an electrical fault.
We recommend that you write the data here:
Some metal parts of the appli-
ance expand and contract when
they heat up or cool down. The
noises are normal.
The flame can look orange or yel-
low in some areas of the burner.
This is normal.
Activate the oven.
Replace the lamp.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.
Set the clock.
Make sure that the settings are
correct.
Refer to "Using the turnspit".
Adjust the temperature if neces-
sary. Follow the advice in the
user manual.
Deactivate the oven with the
house fuse or the safety switch in
the fuse box and activate it again.
If the display shows the error
code again, contact the Custom-
er Care Department.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
.........................................
.........................................
.........................................
Remedy
www.zanussi.com