Assembly Instruction; Front Stabilizer And Connecting Arm Assembly; Main Frame - Energetics ET 620 Assembly Manual

Assembly instruction

Step 1 Front Stabilizer and Connecting
Arm Assembly
1. Install the Front Stabilizer (14) on the front stabilizer holding plate at the bottom of the main frame
with the transportation wheels facing forward and secure them with 2pcs of 3/8" × 3" Carriage Bolts
(77), 2pcs of 3/8" × 23m/m × 1.5T Curved Washers (112) and 2pcs of 3/8" Cap Nuts (96) by using
13.14m/m Wrench (115).
2. Secure 2pcs slide wheel cover (65) on left and right pedal arm (5) with four M5 × 15m/m Phillips
Head Screws (82) by using Combination M5 Allen Wrench & Phillips Head Screw Driver (118).
3. Insert the shaft on left connecting arm (7) to the bushing on left pedal arm (5) and secure with 1pcs
5/16" × 15m/m Button Head Socket Bolt (80-1) together with 1pcs Ø8.7 × 20 ×1.5T Flat Washer (104-
1) by using Combination M5 Allen Wrench & Phillips Head Screw Driver (118). Do it the same way
for right connecting arm (8) and right pedal arm (5).
11