Console Mast Assembly - Energetics ET 620 Assembly Manual

Step 2 Console Mast Assembly
1. Use cable tie to guide the 1150m/m Computer Cable(36) through Console Mast(11) and then pull
out of the console holding plate, and Insert the console mast into main frame and secure with 6pcs
of 5/16" × 15m/m Button Head Socket Bolts (80), 6pcs of 5/16" × 1.5T Split Washers (111), 4pcs of
5/16" × 23m/m × 1.5T Flat Washers (105) and 2pcs of 5/16" × 23m/m × 1.5T Curved Washers (113)
by using Combination M5 Allen Wrench & Phillips Head Screw Driver (118) .
2. Take off the cable tie which ties the Computer Cable (36) and plug in the connectors of the Computer
cable and the two Handpulse W/Cable Assemblies (40) on the Console. Secure the Console on the
Console Assembly (35) with 4pcs of M5 × 10m/m Phillips Head Screws (84) by using Combination M5
Allen Wrench & Phillips Head Screw Driver (118). Pay attention to Avoiding scratching the cables.
12