When Using Bizhub C3850/Bizhub C3350; Loading Letterheads In Portrait Orientation; Loading Letterheads In Landscape Orientation - Konica Minolta bizhub C3350 User Manual

6.5 Loading letterheads
6.5.2

When using bizhub C3850/bizhub C3350

Loading letterheads in portrait orientation

Load letterheads in portrait orientation so that their top edges are set in the reverse direction of the paper
feed port of the tray.
Tips
If you allow printing on both sides of letterhead paper in [Letterhead duplex print permission settings] on this
machine, load the letterheads into the paper tray as shown below.
-
When you load letterheads into Tray1, set the side of the letterhead, on which the company name, pre-
set text and other text are printed, face down.
- When you load letterheads into Manual Feed Tray, set the side of the letterheads, on which the com-
pany name, preset text and other text are printed, face up.
Related setting (for the administrator)
If necessary, you can change the orientation to load letterheads in portrait orientation.
To configure settings: [Utility] - [Administrator Settings] - [System Settings] - [Output Settings] - [Letterhead
Direction] (Default: [Align Trail Edge])

Loading letterheads in landscape orientation

Load letterheads in landscape orientation so that their top edges are at the back of the tray.
Tips
If you allow printing on both sides of letterhead paper in [Letterhead duplex print permission settings] on this
machine, load the letterheads into the paper tray as shown below.
- When you load letterheads into Tray1, set the side of the letterhead, on which the company name, pre-
set text and other text are printed, face down.
-
When you load letterheads into Manual Feed Tray, set the side of the letterheads, on which the com-
pany name, preset text and other text are printed, face up.
[Introduction]
6
6-13