The Inmotion Scv Is Shaking; The Turning Shaft Slips Or Is Off-Centered; The Inmotion Scv Cannot Power Off - InMotion R1XX series User Manual

7.4. The INMOTION SCV Is Shaking

Recommended Action:
Check the joints between the Handlebar and the Turning Shaft. If they are loose, tighten them.
Check the joints between the Handlebar and the Quick Release Lock. If they are loose, tighten them.
Check the joints between the Tires and the Wheels. If they are loose, tighten them.

7.5. The Turning Shaft Slips or Is Off-Centered

Recommended Action:
Step on the Footboard Mat and stand still. If the INMOTION SCV turns to one side automatically, activate
Self-examination Mode.
Check the Tires and make sure they are not worn. If the Tires appear to be in good condition, activate Self-examination
Mode.
Use your INMOTION SCV Smartphone App to adjust steering sensitivity.

7.6. The INMOTION SCV Cannot Power Off

Recommended Action:
Check the Footboard Mat to make sure there is nothing on it and that it is not stuck.
If the INMOTION SCV still cannot power off, turn it upside down (the Handlebar should be pitched at an angle of 30° ).
The Wheels will be rolling and you can now safely power it off.
If the INMOTION SCV still cannot power off, remove the Battery Pack and then reinsert it.
66 / 68