InMotion R1XX series User Manual page 26

Important Working Modes:
Working Mode
Standby Mode
Balance Mode
Automatic Balance
Excessive Angle
Self-examination Mode
Error
Assist Mode
The INMOTION SCV is in Standby Mode by default. Most of the other modes will be started from
Standby Mode.
Indicates the INMOTION SCV has detected a rider and the footboard angle is moderate. Training Mode
and Speed Mode can be activated from Balance Mode. Read Section 3 for more information.
When a rider steps onto the INMOTION SCV and the footboard angle is moderate (between 2° and
15°), the system will start to level the footboard. In the meantime, the INMOTION SCV may travel a
short distance either backward or forward in order to balance itself. An excessive or too small angle will
trigger an error warning.
When a rider steps onto the INMOTION SCV and the footboard angle is too big, the INMOTION SCV
will vibrate to warn the rider to slowly level the footboard.
The INMOTION SCV will examine and calibrate itself in Self-examination Mode. Read Section 3.6 for
more information.
If the INMOTION SCV detects an error or a system fault during normal riding conditions it will
automatically reduce the speed and slowly stop. The Tires will be locked if it needs extra assistance to
solve the problem. Once the Tires are locked, please contact your local distributor for maintenance
service.
Under Assist Mode, the INMOTION SCV will provide a small amount of power to allow the SCV to be
easily dragged. You can choose different reference points when entering Assist Mode. For more
information about Assist Mode, please refer to Section 3.4 Assist Mode.
Description
26 / 68