Safety Alerts; Speed Limiter - InMotion R1XX series User Manual

Item
Steer Balance
Footboard Mat Sensor
RTC Time
Activate Self-examination Mode in an open area.
Park the INMOTION SCV on the ground and keep one meter distance from other objects.
Make sure the Handlebar is vertical. Do not pull the Turning Shaft or hold the Handlebar.
Do not place anything on the Footboard Mat, including your feet.
Doing so could interfere with the result of self-examination, causing injury or damage.

3.7. Safety Alerts

The INMOTION SCV is equipped with multiple safety alerts. It is important to understand these alerts before you attempt to
ride your INMOTION SCV.
3.7.1.

Speed Limiter

When you approach the maximum allowed speed for a given situation, the INMOTION SCV will push the handlebar back to
slow you down. The following figure shows the process of speed limiter.
When the INMOTION SCV pushes the handlebar back, stop leaning forward and slow down. Always leave a gap between
Run the Steer Balance calibration if you detect that your INMOTION SCV leans in an incorrect
direction when it stands in balance.
Calibrate the Footboard Mat sensors to level up the sensitivity.
Adjust time with the assistance of GPRS and GPS*.
Description
44 / 68