Main/Aux Output Switching - HIKVISION DS-7108HGHI-SH User Manual

Start/Stop
Auto-switch
Start Recording
Add IP Camera
Quick Set
Playback
PTZ Control
Aux Monitor
The Add IP Camera is not supported by DS-7100 series DVR.

3.2.3 Main/Aux Output Switching

The DS-7100, DS-7200, and DS-7324/7332HGHI-SH models do not support Aux/Main output switch.
When the HDMI, HDMI/VGA or HDMI1/VGA (DS-8124/8132HGHI-SH) output is configured as the main
output, you can perform the following operation to switch to CVBS, VGA or HDMI2 (DS-8124/8132HGHI-SH)
output as the main output.
Digital Video Recorder User Manual
Enable/disable the auto-switch of the screens.
The dwell time of the live view configuration must be set before using Start Auto-switch.
Start recording of all channels, Normal Record and Motion Detection Recording
are selectable from the dropdown list.
A shortcut to enter the IP camera management interface.(For HDVR series only)
Output Mode is configurable with Standard, Bright, Gentle and Vivid options.
Enter the playback interface and start playing back the video of the selected
channel immediately.
A shortcut to enter the PTZ control interface of the selected camera.
Switch to the auxiliary output mode and the operation for the main output is
disabled.
If you enter Aux monitor mode and the Aux monitor is not connected, the mouse
operation is disabled; you need to switch back to the Main output with the F1 button on front
panel or VOIP/MON button on IR remote control and then press the Enter button.
DS-7200 Series
Figure 3. 1 Right-click Menu
56
DS-7300 and DS-8100/9000 Series