Installing Micro/Sd Memory Card - Vivitar DVR 906 lifecam User Manual

Battery Indicator:
Battery Indicator
NOTE: When the battery capacity drops to a low level, the battery icon will flash on the display,
indicating that the camcorder requires to be recharged. Please charge the battery. When the
battery icon flickers, the camcorder will shut down automatically.
INSTALLING THE MICRO SD MEMORY CARD
 Make sure a High Speed Class or higher Micro SD Memory card 4 (up to 32GB) has been
properly inserted into your camcorder.
 A Micro SD Card must be inserted before use. Micro SD Memory card not included.
Installing the Memory Card:
To properly insert the Micro SD Card, please follow the instructions below:
1. Power off the camcorder.
2. Insert the Micro SD Card into the Micro SD Card
slot in the direction as shown in the image.
3. Gently press the Micro SD Card until you hear a
slight clicking sound. This indicates the memory
card has been inserted correctly.
4. The display screen will show an SD card icon
indicating that the SD card has been successfully installed.
5. To remove the card, gently press on the edge of the card to release it and pull the card out.
Description
The battery level is full.
The battery level is half.
When this icon flashes, this indicates that the battery level is
low and the camcorder will then automatically turn off. Please
recharge your camcorder.
7
,