Installing Micro/Sd Memory Card - Vivitar 936 User Manual

NOTE:
 While the device is charging it cannot be used to capture images.
 When the camcorder is on, connecting it to a computer will not charge the device. Make sure
the camcorder is powered off when recharging.
Battery Indicator:
Battery Indicator
NOTE: When the battery capacity drops to a low level, the battery icon will flash on the display,
indicating that the camcorder requires to be recharged. Please charge the battery. When the
battery icon flickers, the camcorder will shut down automatically.
INSTALLING THE MICRO SD MEMORY CARD
 Make sure a High Speed Class or higher Micro SD Memory card 4 (up to 32GB) has been
properly inserted into your camcorder.
 A Micro SD Card must be inserted before use. Micro SD Memory card not included.
Installing the Memory Card:
To properly insert the Micro SD Card, please follow the instructions
below:
1. Power off the camcorder.
2. Insert the Micro SD Card into the Micro SD Card slot in the
direction as shown in the image.
3. Gently press the Micro SD Card until you hear a slight clicking sound. This indicates the
memory card has been inserted correctly.
Description
The battery level is full.
The battery level is half.
When this icon flashes, this indicates that the battery level is
low and the camcorder will then automatically turn off. Please
recharge your camcorder.
7