Contents Introduction ............................2 What‟s Included ............................ 2 Camcorder Technical Specifications ..................... 3 Computer System Requirements – Windows ..................4 Computer System Requirements – Macintosh ..................4 Parts of the Camcorder ......................... 5 Preparing Your Camcorder ........................6 Maintenance and Care ........................11 Initial Camcorder Setup ........................
Thank you for purchasing this digital video camera. Everything you need to take quality digital photos and videos is included with your digital video camera. Vivitar makes capturing those special moments as easy as possible. Note: Your digital video camera needs an SD Memory card (up to 32GB) for normal use.
Computer System Requirements – Windows To be able to download photos and videos to your PC, you will need the following minimum configuration: Microsoft® Windows XP with Service Pack 3, Windows Vista with Service Pack 1 or Windows 7 ...
Parts of the Camcorder Speaker Lens Microphone LED Flash DV/DC Mode LED Lithium-ion Battery Charging Indicator DC (Photo) Mode Button DV (Video) Mode Button Up / Zoom In Button 10) Right / LED Flash Button 11) OK / Menu Button 12) Down / Zoom Out Button 13) Battery / SD Card Compartment / USB Slot 14) Power Button...
Preparing Your Camcorder Charging the Battery Installing the Memory Card To Charge the Battery: 1. Power off the camcorder. 2. Make sure the battery is inserted correctly. 3. Connect the camcorder with the USB cable to the AC Adapter (and then to an electric socket) or to the computer.
Page 8
Important: Before installing the batteries make sure you are not near water and that your hands are dry. Opening the Battery Door Turn and hold the camcorder with the bottom facing up and the battery door facing you as shown in the diagrams below.
Page 9
Installing the Lithium Battery Your digital camcorder needs a lithium battery in order to operate. The battery is found separately in the packaging. To install it correctly see the diagram below: 1) Insert the battery in the battery compartment with the correct polarity facing up. 2) Use the battery clip found in the battery compartment to make sure that the battery is sitting firmly and secure.
Page 10
Note: A red battery icon will flash on the LCD when the battery power is insufficient. Shortly thereafter your camcorder will power off. Please remove your battery when you don‟t intend to use your camcorder for a long time. ...
Page 11
1) Locate the SD card slot to the left of the battery compartment. 2) Insert the SD memory card correctly in the direction shown. 3) Press the memory card until you hear a “Click” sound. Note: After you insert an SD memory card, the SD card icon will appear on the top right of the LCD, indicating that your SD memory card has been installed successfully.
Note: Check that the small battery cover lever clicks back into place and is in line with the mark line appearing on the side of the lever as shown in (B). Make sure the water resistant battery door is closed properly before using the camcorder underwater.
Initial Camcorder Setup When powering the camcorder ON for the first time the camcorder will take you through the initial setup. Powering the Camcorder ON 1) Charging the Battery Make sure the battery has been fully charged. The energy status of the power is displayed on LCD as shown below: Full battery power Medium battery power Low battery power...
Page 14
Setting the Camcorder Language To set the camcorder menu and message language 1) Press the OK button 2) Press the Left/Right button on the OK dial until you see the Language icon menu option. 3) Press the Up/Down button to highlight and select from the following language options: English / French / Spanish / Portuguese / German / Dutch / Italian / Russian / Turkish 4) Press the OK button to save your choice and for the interface of the camcorder to change to the language you selected.
Powering ON/OFF Your Digital Camcorder Make sure the batteries have been inserted properly into your digital camcorder. If your camcorder uses a rechargeable lithium battery, make sure the battery is fully charged. Make sure an SDHC card has been inserted into your camcorder. (SDHC card up to 32GB - SD Card not included) Powering the camcorder ON Flip open the LCD Panel on the side of the camcorder.
When the camcorder is first powered ON, the DV (Video) Capture Mode will be active. The icons that appear on the LCD screen are the best default settings so that you can begin to capture and enjoy clear quality photos. To change the active camcorder mode, make sure the camcorder is powered ON.
Video Capture Mode The Video Capture Mode allows you to capture videos with your digital video camera. When the camcorder is first powered ON, the camcorder will be in Video Capture Mode. Taking a Video 1) While in Video Capture Mode use the LCD display to direct your digital video recorder at the scene you would like to capture.
Page 18
Video Capture Mode Menus The following are the menus that appear in your camcorder‟s Video Capture Mode:...
Page 19
Scene Menu The Scene Menu allows you to choose scene settings that allow your camcorder to adapt properly to your current environment. 1) Press the OK button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to select the „Scene‟ menu. 3) Press UP or DOWN button to highlight the desired menu selection.
Page 20
Image Quality Menu The Image Quality menu allows you to select the desired quality level of the images taken by your camcorder. Keep in mind that images with a higher image quality level will also take up more memory on your camcorder. 1) Press the OK button to open the menus for the current mode.
Page 21
Color Effect Menu You can choose to add a color effect to the images taken with your camcorder. 1) Press the OK button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to select the „Color Effect‟ menu. 3) Press the UP or DOWN button to highlight the desired menu selection.
Page 22
If the environment has less light (darker) than is needed, increase the exposure setting (by using the positive + count) to increase the amount of light allowed into the lens by your camcorder. 1) Press the OK button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to select the „Light Exposure‟...
Page 23
Metering Menu The Metering setting will affect how your camcorder focuses when capturing an image. Depending on your selection, the camcorder will be more sensitive to focusing on particular areas in the display and adjust the image color and lighting accordingly. Center –...
Page 24
8) Remember that this setting will be remembered by your camcorder until you manually change the setting or restore the camcorder‟s default factory settings. Date/Time Menu When you capture an image with your camcorder, the image will include a time stamp with the date and time that the image was taken.
Page 25
Audio Menu The Audio menu allows you to control the camcorder‟s ability to record audio in the video clips recorded with your camcorder in addition to the video record. Note: This feature may not be available in some versions of this camera. 1) Press the OK button to open the menus for the current mode.
Page 26
Frequency Menu The options in the Frequency menu represent the frequency of the electrical current in fluorescent lighting sources in your locale. If your camcorder is set to a frequency that does not match your country‟s electric current, you may see flickering or waves on the images taken by your camcorder. 50Hz –...
Page 27
Format Memory Card Menu You can use the Format Memory Card menu to delete all of the content that is currently on your camcorder‟s memory card. Keep in mind that formatting the memory card will permanently delete all of the content on your camcorder‟s memory card.
Video Playback Mode The Playback Mode allows you to review and edit photos and videos that you‟ve already taken with you camcorder. When you first turn on the camcorder, the camcorder will be in Video Capture mode by default. ...
Page 29
Video Playback Mode Menus The following are the menus that appear in your digital video camera‟s Video Playback Mode: Protect/Lock Menu Pictures and Videos taken with your camcorder can be protected or “locked” to prevent any deletion or alteration being made to the files. Press the OK button to open the menus for the current mode.
Photo Capture Mode The Photo Capture mode allows you to capture pictures with your digital camcorder. After powering on the digital video camera, press the DC (Photo) button to open the Photo Capture Mode. Taking a Picture 1) While in Photo Capture mode, use the LCD display on the back of the camcorder to direct the camcorder at the scene you would like to capture.
Page 31
The flash is enabled for each photo. Note: If you use this option in a well lit environment, your photo may be appear Forced On too bright/light (overexposed). Photo Capture Mode Menus The following are the menus that appear in your digital video camera‟s Photo Capture Mode:...
Page 32
Scene Menu The Scene Menu allows you to choose scene settings that allow your camcorder to adapt properly to your current environment. 1) Press the OK button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the „Scene‟ menu. 3) Press the UP or DOWN button to highlight the desired menu selection.
Page 33
Image Quality Menu The Image Quality menu allows you to select the desired quality level of the images taken by your camcorder. Keep in mind that images with a higher image quality level will also take up more memory on your camcorder. 1) Press the OK button to open the menus for the current mode.
Page 34
White Balance Menu The White Balance feature allows your camcorder to adjust the coloring of the captured images depending on the type of light source in the current environment. Properly adjusting the White Balance setting to match your current environment will allow the camcorder to properly balance the colors in the images that are taken with your camcorder.
Page 35
Multi SnapShots Menu When enabled, the Multi SnapShots feature allows you to take five rapid snapshots in a row with a single click of the shutter button. This feature can be effective when trying to capture a particular moment in a sporting event or other scenes with quick movements.
Page 36
Light Exposure Menu The Light Exposure setting helps you control the amount of light that enters your camcorder‟s lens. This setting should be adjusted when the environment is lighter or darker than normal. When the environment has more light than is needed, reduce the exposure setting (by using the negative - count) to reduce the amount of light allowed into the lens by your camcorder.
Page 37
7) Press the DC button to exit the menu and return to your previous mode. 8) An icon reflecting your selection will display on the LCD screen. 9) Remember that this setting will be remembered by your camcorder until you manually change the setting or restore the camcorder‟s default factory settings.
Page 38
4) Press the OK button to confirm and select the highlighted menu option. 5) A selected option icon will appear on the selected item. 6) Press the LEFT or RIGHT button to select the next menu item. 7) Press the DC button to exit the menu and return to your previous mode. 8) Remember that this setting will be remembered by your camcorder until you manually change the setting or restore the camcorder‟s default factory settings.
Page 39
5) For each field in the menu, use the UP and DOWN buttons to set the specific date and time. 6) When you have finished setting the date and time, press the OK button to save your settings and return to the previous mode. 7) Press the DC button to exit the menu without saving your settings and return to your previous screen.
Page 40
1) Press the OK button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the „Auto Power Off‟ menu. 3) Press the UP or DOWN to highlight the desired menu selection. 4) Press the OK button to confirm and select the highlighted menu option.
Page 41
PAL – television and video standard used in Europe 1) Press the OK button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the „TV Out‟ menu. 3) Press the UP or DOWN button to highlight the desired menu selection. 4) Press the OK button to confirm and select the highlighted menu option.
Page 42
Firmware (Factory Default Settings) Menu Use this menu to view the Firmware version on your camcorder or to reset your camcorder settings to the Factory Default Settings. Press the OK button to open the menus for the current mode. Press the LEFT or RIGHT button to scroll and select the „Firmware‟ menu. The “Default Setting”...
Photo Playback Mode The Playback Mode allows you to review and edit photos and videos that you‟ve already taken with you camcorder. When you first turn on the camcorder, the camcorder will be in Video Capture mode by default. ...
Page 44
Press the DC button to activate the navigation directional buttons. Use the direction buttons to navigate around the photo. Press the OK button to cancel the navigation feature. Photo Playback Mode Menus The following are the menus that appear in your digital video camera‟s Photo Playback Mode: Rotate Menu Use this menu to rotate the pictures that you‟ve taken with your camcorder.
Page 45
1) Press the OK button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the „Protect/Lock‟ menu. 3) Press the UP or DOWN button to scroll through the menu options. 4) Press the OK button to select and save the desired option.
Page 46
4) Press the UP or DOWN button to scroll through the menu options. 5) Press the OK button when highlighting the “Print Photo” option to print the selected photo. 6) You will be asked to connect the camcorder to the Pictbridge printer. 7) Connect the USB cable provided in the package from the camcorder to the Pictbridge port of the printer.
Connecting the Digital Video Camera to a TV or HDTV The camcorder has an AV port to use your larger TV or HDTV screen in place of the camcorder‟s LCD screen. On plugging the TV-out cable (supplied) to the camcorders AV out jack, the LCD screen will turn blank.
2) On PC: The “Vivitar Experience™ Image Manager” Installer window appears. If the window does not appear, open the application‟s CD/DVD drive and click on “Setup.exe” to launch the installer. 3) On Macintosh: Click the icon that appears on the desktop to install the “Vivitar Experience™ Image Manager”.
On PC and Macintosh: Click the “I accept the terms of this license agreement” and then click “Next” to continue. 10) On PC only: Let the ““Vivitar Experience™ Image Manager”” installer create the folder to where the program will be installed, and then click “Install”.
Getting Photos and Videos from Your Camcorder to Your Computer An SD card needs to be inserted. Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their way to your computer. 1) Select the “Get Images” button from the Main menu. 2) The “Get media from device”...
Use automatic “Geotagging” with built in Google Maps For more details on how to use the “Vivitar Experience™ Image Manager”, open the „Help Guide‟ from the Help menu or click the “Take a Tour” button on the application‟s Home screen.
Page 52
Transferring Photos and Videos: MACINTOSH 1) Use the USB cable that came with your camcorder to connect your camcorder to your computer. 2) A „Mass Storage‟ icon appears on the LCD. 3) The camcorder‟s device icon appears on the desktop. 4) Click on the device icon and open the DCIM folder and the folder inside to view the media files.
Camcorder Maintenance The digital video camera is a delicate device. Please handle your digital video camera with care to avoid damaging it. Do not expose your digital video camera to heat sources. Do not use you digital video camera in wet or moist conditions. Sakar Warranty Card This warranty covers for the original consumer purchaser only and is not transferable.
For phone support in the US please call 1-800-592-9541, in the UK call 0800 917 4831, in Australia call 1800-006-614. If you would like to call from anywhere else, please visit www.vivitar.com for your local toll free number.
Page 55
Recorded images are not saved in memory The video camcorder was turned off before the If the battery low indicator appears on the images are saved in memory. LCD monitor, recharge the battery immediately. DVR 995WHD-120111-TA...