Changing Camcorder Mode - Vivitar DVR 906 lifecam User Manual

Changing Camcorder Mode

THREE MAIN MODES
1. Video Capture Mode - Use this mode to capture videos with your camcorder.
2. Time Lapse Mode – Use this mode to capture time lapse videos with your camcorder.
3. Photo Capture Mode - Use this mode to capture photos with your camcorder.
SWITCHING MODES
After turning on the camcorder, you can press the MODE (M) button to switch between the
modes.

In Video Capture Mode and Time Lapse Mode, press the Shutter button to start
recording and press it again to stop.

In Photo Capture/Camera Mode, press the Shutter button to take photo.
MODE INDICATOR LIGHTS
Busy Indicator (red):
When the camera is busy such as when recording videos, shooting photos or when using the
Time Lapse Mode, the light indicator flickers red.
NOTE: When pressing the MODE, SET or POWER button, the red LED light above each button
flashes once.
Charging Indicator (blue):
When the camcorder is being charged, the blue light turns on. The light indicator turns off when
the camcorder has been fully charged.
14