Powering On Your Camcorder - Vivitar DVR 906 lifecam User Manual

Powering On Your Camcorder

TURNING POWER ON AND OFF
1. Press and hold the POWER button for about 3 seconds to turn on the camcorder.
The LCD screen briefly displays 'ON' and opens the default Video Capture Mode. A beep
can also be heard from the buzzer.
2. Press and hold the POWER button again for about 3 seconds to turn the power off.
The LCD screen briefly displays 'OFF' and then powers off. A beep can also be heard from
the buzzer as the camcorder is being powered off.
NOTE:
Energy Save: In order to save the camcorder's battery power, the camcorder automatically
powers off after sitting idle for 3 minutes.
Low Power Shutdown: In case of very low battery power, the LCD displays an icon "
and then the camera automatically shuts off.
12
"