Time Lapse Mode - Vivitar DVR 906 lifecam User Manual

 After recording the video, the amount of available time left to capture additional videos
as per your memory card size and selected resolution size appears on the LCD screen.
If the memory card is full or the battery is low, the camcorder will automatically stop
recording. The video is a period of three minutes by default.
 The video is automatically saved to the camcorder's Micro SD Memory card.

Time Lapse Mode

The Time Lapse Mode allows you to capture time lapse videos with your digital camcorder.
TAKING A TIME LAPSE VIDEO
1. Power On:
Press and hold the Power button to power for about 3 seconds on the camcorder.
2. Enter Time Lapse Mode:
When you first power on the camcorder, the Video Capture Mode will be active.
Press the MODE button once to enter the Time Lapse Mode.
The Time Lapse icon appears on the LCD.
3. Change Resolution:
To select the resolution, press the SET button to switch between HI and LO resolution.
- HI indicates 720P 1080x720P@15fps
- LO indicates VGA 648x480@30fps
4. Capture Your Time Lapse Video:
Press the Shutter button to begin recording and again to stop recording.
The video is automatically saved to the camcorder's Micro SD Memory card.
16