Advertisement

Quick Links

EFCH 9106 HM SS
SLIM HOOD
THE BEAUTY OF SIMPLICITY
USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EFCH 9106 HM SS and is the answer not in the manual?

Questions and answers

Summary of Contents for EF EFCH 9106 HM SS

  • Page 1 EFCH 9106 HM SS SLIM HOOD THE BEAUTY OF SIMPLICITY USER MANUAL...
  • Page 2: Table Of Contents

    Table of Contents From the Manufacturer Specifications SAFETY: Read this before installation Description of Parts Ducted vs. Re-circulating Setting Installation Operation Cleaning & Maintenance Troubleshooting...
  • Page 3: From The Manufacturer

    From the Manufacturer This appliance and the packaging are produced by processes that minimize waste and respect the environment. Please help us to continue the protection of the environment by disposing the packaging in a correct way. Safety! Please do not allow young children to play with the plastic bag packaging.
  • Page 4: Safety: Read This Before Installation

    SAFETY: Read this before installation Do not connect the appliance if there are obvious signs of transportation damage. Read this user manual thoroughly before attempting to use this appliance. Installation and repair should be attempted only by qualified technical personnel. It is dangerous to modify any part of this appliance.
  • Page 5: Description Of Parts

    Description of Parts Stopper 120mm 2 Charcoal filters 3 Aluminium filters( for 90CM) 2 Aluminium filters( for 60CM) 6 Screws 2 screws are used for fixing hood unit on the wall as Installation Step 3. Other 4 screws are used for fixing hood unit to cabinet as well if necessary...
  • Page 6: Ducted Vs. Re-Circulating

    Ducted vs. Re-circulating Your cooker hood can be configured to operate in the ducted or re-circulating mode: A. DUCTED MODE (VENTED MODE) In the ducted mode, cooking fumes are vented outdoors through suitable connection of 125mm diameter. In this mode, only the aluminium filters are installed.
  • Page 7: Setting

    Setting The operating mode of your cooker hood must be set before installation A. To set your hood to operate in the ducted mode remove the aluminium grease filters and locate the 2 setting screws Turn the screws clockwise until locked Install the outlet connector the back or top outlet and the stopper in the other.
  • Page 8: Installation

    Installation STEP 1: Remove the aluminium filters and place them in a safe location to avoid damage. STEP 2: Install the 2 screws on the wall: 700mm...
  • Page 9: Installation

    Installation STEP 3: Hang the hood STEP 4: Tighten the 2 screws completely Clockwise STEP 5: Put back the aluminium filters...
  • Page 10: Operation

    Operation The hood is equipped with 3 speed touch control. Use the low speed for simmering,medium speed for light cooking. Use the high speed for frying or heavy cooking. It is also equipped with LED lamp to illuminate your cooking area when needed. High Delay Stop Light...
  • Page 11: Troubleshooting

    Troubleshooting Symptoms Possible Cause Action Check that the plug is No electrical supply connected and the main Plug and main switch no switched is turned on. connected Check if the switch is Motor does not function damaged or short circuit – replace or Damaged switch or short circuit repair.
  • Page 12 For original parts&reliable service CASA (S) PTE LTD. 15 KIAN TECK CRESCENT SINGAPORE 628884 TELEPHONE:+65 6268 0077 FAX:+65 6898 0510 EMAIL:service@casa.com.sg...

Table of Contents