Connecting Power Source
Connect power, using one of the methods listed below:
To use the power adapter
Connect a DC 12 V / AC 24 V power source to the power input terminal as shown below.
(Connect to the DC 12 V / AC 24 V UL Listed, Class 2 Power Supply only on the unit. )
To use the PoE (Power over Ethernet) device
Connect the PoE cable to the LAN port on the unit. You must use the "IEEE802.3af" standard PoE device.
PoE Device
PoE Device
(IEEE802.3af )
(IEEE802.3af )
Note:
If the camera doesn't work properly after connect PoE device, please check if the PoE device is supplying enough power.
12
Connections