Dometic CK36H401RI Harrier Inverter Operating Manual page 25

Dometic Harrier Inverter
13 Disposal
Regulations for environmental safety and correct disposal
All organisations must apply a set of procedures to identify, evaluate and
control the influence that their activities (manufacturing, products, services,
etc.) have on the environment.
The procedures to be followed to identify significant environmental impact
must take the following factors into account:
 use of raw materials and natural resources
 atmospheric emissions
 discharge of liquids
 waste management and recycling
 contamination of the soil
In order to minimise environmental impact, the manufacturer provides a
series of indications here below that should be taken into account by all those
who, for whatever reason, interact with the appliance during its working life.
 All packing components must be disposed of (preferably recycled) in
compliance with statutory legislation in the country in which disposal takes
place.
 All product components must be disposed of (preferably recycled) in
compliance with statutory legislation in the country in which disposal takes
place.
 For correct disposal, the appliance must be consigned to an authorised
waste disposal company to ensure that all recyclable components are
reused and the remaining materials are processed properly.
 During installation ensure the room has adequate ventilation to prevent
the build-up of stale air that might be harmful to the health of the
operators.
 During operation and maintenance ensure that any waste pollutant
products (oil, grease, etc.) are disposed of correctly.
 Keep noise levels down to reduce noise pollution.
EN
Disposal
25