Setting The Temperature; Adjusting The Air Nozzles; Setting The Timer - Dometic CK36H401RI Harrier Inverter Operating Manual

Dometic Harrier Inverter
8.6

Setting the temperature

Cooling Mode
In the "Cooling" (
temperature between 16 °C and 30 °C via the remote control.
➤ Use the + or – button to select the desired temperature.
✓ The roof air conditioner confirms the receipt of the values with a beep.
✓ The temperature is set on the roof air conditioner.
Heating Mode
In the "Heating" (
and 30 °C via the remote control.
➤ Use the + or – button to select the desired temperature.
✓ The roof air conditioner confirms the receipt of the values with a beep.
✓ The temperature is set on the roof air conditioner.
8.7

Adjusting the air nozzles

The air supply within the vehicle can be regulated by setting the air nozzles.
➤ Press the
button and/or the
Pressing again will fix the door at the current angle. When the roof air con-
ditioner is turned off, the doors return to the closed position.
If the doors become misaligned they will return to the default position
when the unit is turned off. Also, they can be rotated safely by hand with-
out damaging the motors (fig. 4 1, page 5).
8.8

Setting the timer

The timer function allows you to set a specific time period for air conditioning.
You can specify the switch-on time and the switch-off time. The time can be
set in 0.5 hour increments.
I
NOTE
The remote control returns to its initial mode if no button is
pressed on the remote control for 15 seconds while programming
the timer.
EN
) and "Dehumidifying" (
) mode you can specify a temperature between 16 °C
Operating the roof air conditioner
) modes you can specify a
button to start oscillation of each door.
19