Installing Or Replacing The Solid-State Drive - Lenovo ThinkStation P310 User Manual

What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 105.

Installing or replacing the solid-state drive

The solid-state drive is only available on some models. This section provides the following instructions:
• "Installing the solid-state drive" on page 87
• "Replacing the solid-state drive" on page 88
Installing the solid-state drive
Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page v.
To install the solid-state drive, do the following:
1. Install the solid-state drive into the storage converter shipped with the solid-state drive. Then install the
four screws to secure the solid-state drive to the storage converter.
Figure 60. Installing the solid-state drive into the storage converter
.
Chapter 7 Installing or replacing hardware
87