b. Press the two clips toward each other as shown and then pull the eSATA connector or IEEE 1394
connector out of the flex module.
Figure 41. Removing the eSATA connector or IEEE 1394 connector from the flex module
4. Note the orientation of the eSATA connector or IEEE 1394 connector and route the eSATA connector or
IEEE 1394 connector cable into the cable clip.
5. Place the eSATA connector or IEEE 1394 connector into the metal retainer. Then insert the eSATA
connector or IEEE 1394 connector into the corresponding slot in the flex module as shown.
Figure 42. Installing the eSATA connector or IEEE 1394 connector in the flex module
.
Chapter 7
Installing or replacing hardware
75